Equipment ListThe following equipment list is provided to give potential customers and idea of what type of equipment we have and approximately what kind of work we are capable of doing and what general sizes of molds, dies, etc. we can work on. Typically, in regard to molds, we work on tools that will go into a 500 Ton press or smaller, although, under special circumstances, we have built some tools for 750 Ton presses.
MILLING
Hurco VMX-24 CNC Machining Center with 20 Tool Changer (Travel: X=24", Y=20", Z=24" )
Hurco VMX-42 CNC Machining Center with 20 Tool Changer (Travel: X=42", Y=24", Z=24" )Hurco BMC-40 CNC Machining Center with 30 Tool Changer (Travel: X=40", Y=30", Z=22" )(6) Bridgeport Mills w/ ReadoutsSupermax No. 2 Vertical & Horizontal Mill w/ Readouts (Travel: X= 42", Y=16", Z= 17" )Cincinnati No. 3 Vertical Mill KMC Bed Type No. 5 Vertical Mill w/ Readouts (Travels: X=54", Y=19", Z=30" )EDM
AGIE MONDO STAR 50 w/ 100 AMP Power Supply (Size: 27 x 40 Tank, 2200 lbs. Table Weight Cap.)ELOX Vertical EDM Machine with 50 AMP Power Supply (Size: 23 x 35 Tank, 1100 lbs. Table Weight Cap.)GRINDING
Okamoto Surface Wet Grinder (Travel: 12" X 24", 11.5" X 23.5" Magnetic Chuck)Gallmeyer Livingston. Wet Grinder (Travel: 16" X 29", 14" X 24" Magnetic Chuck)(4) K.O. Lee Surface Grinders w/ Readouts (Size: 6" X 12" Magnetic Chuck)Preci-Grind OD/ID Grinder (8" Diameter X 20" Long)Falcon Tool and Cutter Grinder TURNING
(3) 16" Swing Lathes (Size: 16" Dia. X 54" between centers)See also the OD/ID Grinder aboveMISC
Ikeda Radial Drill Press (Size: 4' Boom with 13" Column )25 Ton Spotting Press 3FT.X 3FT. Bolster Plate (36" between straining rods left to right and 16" front to back)WELDING / HEAT TREAT
Miller Tig Welder 300 AmpDytron Micro Tig Welder (portable)(2) Lincoln Mig Welders 250 Amp (1) Stick Welder (2) Gas and (1) Electric Heat Treat Furnace Sidewinder 55 Plasma Cutting Torch Cutting and Brazing Outfit (Propane) HOIST / FORKLIFT
(2) 5 Ton Overhead Crain 3 Ton Overhead Crain (2) 2 Ton Swing Cranes 3 Ton Hyster Fork Lift INSPECTION
Starrett Optical Measuring System (HE 400-5) (with Geometric Readout (Quadra-Check 2205) with Edge Sensor)
Starrett Manual Coordinate Measuring Machine (HGC2018-16) (with Measure Manager and Reverse Engineering Software)Hardness or Rockwell Tester Surface Plate (Size: 24" X 24" )ENGINEERING
(3) 3.2 MHz Pentium 4 Workstations (with 2 GB RAM, 80 GB HDD, 128MB VRAM)
Cimatron E8 (w/ Surfacing, Solids, Drafting, Assembly, & NC Capabilities)Cadkey (w/ FastSURF, FastSOLIDS, RevEng, & DME Mold Base Catalog)Surfcam Microsoft Office Professional (w/ Word, Excel, Access, Powerpoint, & Publisher)Palm Handhelds (Project tracking, scheduling, notes)Paint Shop Pro (for Graphic file handling, Gif, Jpg, Tif, etc.)